August 13th, 2021
When it comes to fire protection systems in New York, most people imagine fire alarms, standpipes, and automatic sprinklers. They usually skip something very crucial – water pressure. To maintain high water pressure, there’s a very important component you need in addition to these components. It is called the fire pump.
This blog post will provide an overview of a NYC Fire Pump and help you understand everything about it. Let’s begin!
Whether you have standpipes, foam systems, sprinklers, or roof tanks, a New York City Fire Pump can help you increase the water pressure of any fire protection system. Because fire pumps are very effective against gravitational force, you can install them in high-rise buildings where water pressure is often inadequate. They’re mostly connected to the water source and are built to boost water pressure.
The answer to this question is very straightforward – maintaining high water pressure. Often, the local municipality water distribution is not enough to meet fire protection systems that require high water pressure. By employing a high-quality fire pump, you can enhance the water pressure and meet the hydraulic demands of the fire protection system.
For instance, there is a standpipe with a water supply source at ground level of a building. In such a case, it would be impossible to supply high-pressure water to the top floor of the high-rise building. That’s when you need a NY Fire Pump to increase the water pressure, and achieve the desired outcome.
The role of the fire pump is to check the water pressure of the fire protection system. When it drops down, the fire pump automatically comes into action and increases the pressure as well as volume. These pumps are typically connected to the local water supply source or other sources. When the water source is unable to supply higher water pressure per the needs of the fire protection system, the fire pump compensates for that. This shows how indispensable fire pumps are for fire protection systems.
As already mentioned, fire pumps are connected to an external water supply, such as a roof tank or municipal water pipe. The pump acts as a water pressure booster and keeps the pressure high when it gets low. One must consider several things while installing a fire pump, such as monitoring, testing, and inspecting the efficiency of the fire pump. These stages shouldn’t be compromised to achieve optimal results and safeguard effectiveness.
It is imperative to ensure that your fire pump will properly function during a fire incident. For that, all you need to do is inspect and test it regularly in accordance with the national fire protection standards. Your primary concern should be checking the temperature of the pump every week to ensure it has adequate heat or temperature. It must be at least 40°F (4.0°C) for an electric motor and 70°F (21°C) for a diesel engine without an engine heater. You can use an engine jacket water heater to maintain the required temperature. A weekly inspection of your fire pump and its electrical system is also important to ensure the system’s reliability and performance. Additionally, make sure there’s no water pooling around the pump or floor.
Callaghan Pump and Controls Inc. is an authorized distributor of Aurora (NY only), Carver, Ebara, Gorman Rupp, Hydromatic, Liberty, Sta-Rite, and Yaskawa fire pumps in the New York metropolitan area. Whether they’re small 7.5 HP in-lines or 5000 GPM split-case fire pumps, we know how to handle fire protection needs for any building. Our professionals are specialized in high-pressure pumps and can help you meet the water demand of high-rise buildings.
We sell more fire pumps than any other distributor in the New York area. Also, we help engineers and contractors with their needs and specifications, providing them with the best-in-class solutions at competitive prices. Our fire pumps pass the required 50%, 100%, and 150% test at the Aurora pump factory and these results are provided with every fire pump we distribute.
So far, we’ve worked with many brands of fire pumps and have unparalleled knowledge of different engineering projects. Our team strives hard to provide you with efficient New York and New York Fire Pumps that can help you with maximum water pressure for firefighting. Our products are versatile and can be installed seamlessly. In conclusion, Callaghan Pump assures you comprehensive solutions for firefighting endeavors in New York and surrounding areas.
Get in touch with us to inquire.