April 19th, 2023
Both residential and commercial buildings have vastly different requirements for wastewater transfer. Therefore, we supply sewage ejector pump systems to ensure superior reliability, safety, and efficiency. Suitable for commercial applications, our systems are designed to give long-term reliable performance when installed in sump pits. Plus, they are available in automatic, dual, and manual versions. Read on to learn more about sewage pump replacement, installation, and selection.
The role of a sewage pump system is to grind the matter in wastewater and allow it to flow to sewer lines. In a commercial building, such as a restaurant or hotel, the pump functions similarly to a garbage disposal, grinding up everything that was held down the drain. The smaller pieces move through pipelines without any risk of clogging.
A sewage pump consists of a centrifugal pump, which enables solids to pass through without clogging the pump. The motor rotates the impeller and creates water pressure to push the water from the impeller to the discharge pipe. The pump is usually powered by a 10-25 foot electric rod, and the voltage may be 115, 230, 460, or 575, depending on the pump model.
A sewage pump helps you transfer sewage solids and liquids from one place to another. It is set up at the lowest point of the available sewage basin and is typically submerged. This is why it is referred to as a submersible sewage pump. A sewage pump can work in manual, automatic, or dual mode.
Since the dual-mode has a sewage ejector pump systems piggyback plug, it lets your pump be a manual or an automatic pump. On the other hand, the manual mode bypasses the switch and is directly plugged into a socket. Lastly, the automatic pump is plugged in using the floating switch. We recommend not using the manual sewage pump in a sewage basin. This is simply because of sewage overflow.
Whether it’s a hotel, hospital, or restaurant, sewage that does not dissolve is a key issue that can be resolved with the help of a sewage ejector pump system. Everything from flushing a tampon applicator to food scraps can be bad for sewer lines. To prevent clogs, the commercial sewage pump is the best bet. The pump ensures that wastewater is transported away from low points.
If your commercial building is at the bottom of a hill, but the wastewater pump station is at the top, you can use a sewage pump to aid in the separation of solid waste from wastewater. The pump will push it up and into the sewer lines, directing the flow of wastewater. This will avoid backflow into your sinks, toilets, and drains, saving you hundreds of dollars to sanitize and clean surfaces.
Below are some key suggestions for choosing the best commercial sewage pump:
At , we offer three different styles of sump and sewagepump to meet a wide range of needs. This includes Hydromatic submersible pumps that rest in the pit below the water line, Gorman Rupp self-priming pumps that lift the water out of the pit, and Carver vertical pedestal pumps that have the motor above the pit and the pump below the water level.
For more info on the sewage ejector pump system, talk to us today.